How Much Does Trenchless Pipe Repair Cost?

Trenchless pipe repair has become a popular solution for fixing damaged pipelines without the need for costly and time-consuming excavation. But, as with any service, one of the most pressing questions on homeowners’ minds is how much it will cost. In this article, we will explore the factors that affect trenchless pipe repair costs and provide you with an estimate of how much you can expect to pay for this innovative solution. So if you’re considering trenchless pipe repair but are unsure about the price tag, read on to find out more!

Factors that Affect Trenchless Pipe Repair Cost

Trenchless pipe repair is becoming a popular choice for homeowners and businesses alike due to its efficiency and cost-effectiveness. However, the cost of trenchless pipe repair can vary depending on several factors.

One of the most significant factors that affect the cost of trenchless pipe repair is the location of the pipe. Pipes located below buildings, roads, or other structures require more complex repairs and may result in higher costs. Additionally, pipes located in areas with difficult terrain or poor soil conditions may also increase the cost of repair.

The length and diameter of the pipe are also important considerations when determining the cost of trenchless pipe repair. Longer pipes or those with larger diameters may require more materials and labor, resulting in higher costs.

The type of damage to the pipe is another factor that affects the cost of trenchless pipe repair. Minor cracks or leaks can often be repaired relatively easily and inexpensively using a variety of methods. However, more severe damage such as collapsed pipes or extensive corrosion may require more complex repairs and result in higher costs.

The extent of damages to the pipe is also an important consideration when determining repair costs. If only a small section of the pipe needs to be repaired, it will likely be less expensive than repairing an entire length of damaged piping.

Finally, the accessibility of the pipes can impact repair costs as well. Pipes located in hard-to-reach areas may require additional equipment or labor to access them for repairs, increasing overall costs.

In summary, several factors can impact the cost of trenchless pipe repairs including location, length and diameter, type and extent of damage, as well as accessibility. It’s essential to have a professional assessment done by a reputable contractor before estimating any costs accurately.

Location of the Pipe

The location of the pipe is one of the most important factors that affect the cost of trenchless pipe repair. The accessibility of the pipe can impact the difficulty and complexity of the repair, which in turn affects the overall cost.

For example, a pipe located in a hard-to-reach area such as under a building or in a remote location may require additional equipment and labor to access. This can increase the cost of repairs significantly compared to pipes that are easily accessible.

Similarly, pipes located in areas with difficult terrain such as rocky soil or steep slopes may also be more expensive to repair due to the additional effort required to access and work on them.

On the other hand, pipes located in open areas with easy access will generally be less expensive to repair than those located in hard-to-reach areas. For instance, pipes located alongside roads or in open fields are usually easier to reach and repair.

It’s important for homeowners and property owners to understand how location affects trenchless pipe repair costs so they can plan accordingly. In some cases, it may be necessary to budget for additional expenses if a pipe is located in a difficult-to-reach area. However, by working with an experienced trenchless pipe repair contractor, property owners can often find ways to reduce costs while still getting high-quality repairs done.

Length and Diameter of the Pipe

The length and diameter of the pipe are important factors that can affect the cost of trenchless pipe repair. The longer and wider the pipe, the more expensive it will be to repair using trenchless methods.

For instance, a 50-foot-long pipe with a diameter of 4 inches will be less expensive to repair than a 100-foot-long pipe with a diameter of 8 inches. This is because larger pipes require more materials and equipment for repairs.

Moreover, the condition of the pipe can also impact its repair cost. If there are multiple cracks or breaks along its length, then it may require more time and effort to fix.

It is important to note that traditional dig-and-replace methods can also be affected by these factors. However, trenchless methods are generally considered more cost-effective as they do not require extensive excavation work which can add up to the overall cost.

In general, the average cost for trenchless pipe repair ranges from $80-$250 per foot depending on various factors such as location, type of damage, extent of damages, accessibility of pipes, among others. It is always advisable to get multiple quotes from different contractors before deciding on one.

Overall, when considering trenchless pipe repair options, it is essential to take into account the length and diameter of the damaged pipes as well as their overall condition in order to get an accurate estimate for repairs.

Type of Damage to the Pipe

The type of damage to the pipe is a crucial factor that affects the cost of trenchless pipe repair. The type of damage can vary from small cracks to complete collapse, and each requires a different approach for repair.

Minor cracks or leaks can be fixed with simple lining methods, which are relatively cheaper than other methods. However, if the damage is severe, such as a complete breakage or collapse of the pipe, it may require more extensive repairs, which can be more expensive.

Another critical factor in determining the cost is whether the damage is caused by external factors like tree roots or internal factors like corrosion or age-related wear and tear. In some cases, it may be necessary to perform additional repairs to prevent further damage from occurring.

Moreover, if there are any obstructions in the damaged area that need to be removed before starting repair work, this will add extra costs to the overall project.

It’s essential to have a professional inspection conducted by an experienced contractor who can accurately assess the type and extent of damage and provide an estimate based on their findings. This will help you get an idea of what kind of repairs you need and how much they will cost.

In conclusion, when it comes to trenchless pipe repair costs, the type of damage plays a significant role. It’s important to hire a reputable contractor who can identify the problem and offer effective solutions at a fair price.

Extent of Damages to the Pipe

The extent of damages to the pipe is a significant factor in determining the cost of trenchless pipe repair. The extent of damage refers to the severity and complexity of the problem.

Minor issues such as cracks or small leaks can be repaired quickly and easily with less expensive solutions. However, more extensive damages such as collapsed pipes or major leaks may require more complex and costly repairs.

For instance, if a pipe has a minor crack, it can be fixed using cured-in-place-pipe (CIPP) lining. This method involves inserting a resin-coated liner into the damaged area, which hardens and creates a new pipe within the old one. On average, this method costs between $80to$250 per foot.

On the other hand, if there is extensive damage such as a collapsed pipe, pipe bursting may be necessary. Pipe bursting involves breaking apart the old pipe while simultaneously laying down a new one in its place. This process requires more equipment and labor, making it more expensive than CIPP lining. On average, this method costs between $150to$300 per foot.

It’s essential to have an expert assess the extent of damage before deciding on the repair method and cost. Ignoring significant damages can lead to more severe problems down the line and higher expenses.

In summary, when it comes to trenchless pipe repair cost, the extent of damages plays a crucial role in determining the overall expense. Minor issues are less expensive to fix with simpler methods like CIPP lining, while larger problems require more complex solutions like pipe bursting that come at a higher price point.

Accessibility of the Pipes

Accessibility of the pipes is an important factor that affects the cost of trenchless pipe repair. If the pipes are located in a hard-to-reach area, such as under a building or in a densely populated urban area, it will be more difficult and time-consuming to access them. This will increase the overall cost of the repair.

In some cases, a contractor may need to excavate or remove obstacles to gain access to the damaged pipe. For example, if there are trees or other structures above the pipe, they may need to be removed before repairs can begin. The cost of this additional work will be factored into the overall cost of the repair.

On the other hand, if the pipes are easily accessible and require minimal excavation or removal of obstacles, then the cost of trenchless pipe repair will likely be lower. This is because less time and effort will be required to complete the repairs.

It is important for property owners to consider accessibility when selecting a trenchless pipe repair method and contractor. Some methods may require more access points than others, which can increase costs if those access points are difficult to reach.

Overall, accessibility is an important factor that should not be overlooked when considering trenchless pipe repair costs. Property owners should consult with their chosen contractor to determine how accessibility factors into their specific situation and what steps can be taken to minimize costs while still achieving effective repairs.

Types of Trenchless Pipe Repair Methods

Trenchless pipe repair is a cost-effective and efficient alternative to traditional dig-and-replace methods. There are three main types of trenchless pipe repair methods: Cured-in-Place-Pipe (CIPP), Pipe Bursting, and Slip Lining.

Cured-in-Place-Pipe (CIPP) involves the insertion of a flexible liner coated with resin into the damaged pipe. The liner is then inflated and cured in place using heat or UV light, creating a new pipe within the old one. This method is ideal for repairing pipes that have cracks, holes, or corrosion.

Pipe Bursting involves the use of a bursting head that breaks apart the damaged pipe while simultaneously pulling through a new pipe behind it. This method is best suited for pipes that are severely damaged or collapsed.

Slip Lining involves inserting a smaller diameter pipe into the existing damaged pipe and sealing it in place with grout or resin. This method is useful for repairing pipes that have minor damage such as cracks or leaks.

The cost of trenchless pipe repair varies depending on factors such as location, length and diameter of the pipe, type of damage to the pipe, extent of damages to the pipe, and accessibility of the pipes. On average, CIPP can cost between $80-$250 per foot, Pipe Bursting can cost between $60-$200 per foot, and Slip Lining can cost between $50-$100 per foot.

Compared to traditional dig-and-replace methods which can be costly due to excavation costs and labor fees, trenchless pipe repair methods offer significant savings. In addition to saving money on repairs costs, trenchless methods also reduce disruption to surrounding areas such as landscaping and driveways.

When searching for a trenchless pipe repair contractor it’s important to research local contractors by reading reviews from previous customers and checking their credentials such as licensing and insurance coverage. It’s also recommended to get multiple quotes from different contractors in order to compare prices and services offered.

In conclusion, understanding the different types of trenchless pipe repair methods available along with their associated costs is crucial when deciding on an appropriate solution for repairing damaged pipes. By choosing a reputable trenchless contractor who offers quality services at reasonable prices homeowners can save both time and money while minimizing disruption to their property.

Cured-in-Place-Pipe (CIPP)

Cured-in-Place-Pipe (CIPP) is a trenchless pipe repair method that involves the insertion of a resin-saturated liner into the damaged pipe. The liner is then inflated and cured in place, creating a new, seamless pipe within the old one. CIPP is an effective and efficient solution for repairing damaged pipes without the need for excavation.

The cost of CIPP varies depending on several factors such as the diameter and length of the pipe, location of the pipe, extent and type of damage to the pipe, accessibility of the pipes, and other site-specific conditions. On average, CIPP can cost anywhere from $80to$250 per foot.

The length and diameter of the pipe are significant factors affecting CIPP costs because larger pipes require more materials and labor to install. Similarly, if the damaged section is longer, it will require more material to repair it hence increasing costs.

The type and extent of damage are also crucial factors affecting CIPP costs. If there are multiple damages or severe damage in sections that require repair, this will increase both material and labor costs.

Accessibility is another factor that affects CIPP costs; if pipes are located in areas that are difficult to access such as under buildings or roads, additional equipment may be necessary to complete repairs which increases overall costs.

Overall, CIPP is typically less expensive than traditional dig-and-replace methods because it requires less equipment and labor-intensive work. Additionally, it has a longer lifespan than traditional methods since it creates a new seamless pipe within an old one hence reducing future maintenance needs.

In conclusion, when considering trenchless pipe repair options like CIPP method for your damaged pipes you should consider all these factors when estimating your project’s total cost.

Pipe Bursting

One of the most effective and popular methods of trenchless pipe repair is pipe bursting. This technique involves breaking apart the existing damaged pipe while simultaneously pulling a new one through its place. The new pipe is made of high-density polyethylene (HDPE) material, which is more durable and long-lasting than the old one.

The cost of pipe bursting varies depending on several factors such as the length and diameter of the pipe, extent of damage, accessibility, and location. On average, homeowners can expect to pay around $100to$200 per foot for pipe bursting. For instance, if you have a 100-foot-long pipeline that needs replacement with pipe bursting, it could cost you anywhere from $10,000to$20,000.

It is important to note that this method may not be suitable for all types of pipes or damages. Pipes made of brittle materials like cast iron may not withstand the pressure required for bursting. Additionally, if there are multiple bends or turns in the pipeline, it may be difficult to pull a new pipe through without causing further damage.

Compared to traditional dig-and-replace methods, pipe bursting can save homeowners time and money by avoiding extensive excavation work. Traditional methods involve digging up large portions of your yard or driveway to access the damaged pipes, leading to additional costs for repairing landscaping or hardscaping.

To find a reputable contractor who specializes in trenchless pipe repair using pipe bursting technique, homeowners should research local companies online and check their credentials. Getting multiple quotes from different contractors can also help compare prices and services offered before making a final decision.

In conclusion, if you have damaged pipes that require replacement but want to avoid extensive excavation work and high costs associated with traditional methods, consider trenchless pipe repair using the pipe bursting technique.

Slip Lining

Slip lining is a trenchless pipe repair method that involves inserting a new pipe into the existing damaged one. The new pipe, usually made of high-density polyethylene (HDPE), is slightly smaller in diameter than the old one. This allows it to fit snugly inside the old pipe and create a new, leak-free pipeline.

The cost of slip lining depends on several factors such as the length and diameter of the damaged pipe, the extent of damage, and accessibility. On average, slip lining can cost anywhere from $80to$250 per foot. For example, if you have a damaged sewer line that is 50 feet long, you can expect to pay between $4,000and$12,500 for slip lining.

One advantage of slip lining over traditional dig-and-replace methods is that it’s less disruptive and time-consuming. Since there’s no need to excavate the entire length of the damaged pipe, slip lining can be completed in just a few days with minimal disruption to your property or neighborhood.

It’s important to note that slip lining may not be suitable for all types of damage or pipes. It’s best suited for fixing minor cracks, leaks or corrosion in sewer lines or stormwater drains. If your pipes have significant damage such as collapsed sections or major blockages caused by tree roots or debris buildup, then other trenchless methods like CIPP or pipe bursting may be more appropriate.

To determine whether slip lining is right for your situation and get an accurate cost estimate, it’s recommended that you consult with a professional trenchless pipe repair contractor who has experience with this method. Be sure to research local contractors online and check their credentials before hiring them for any work on your property. Getting multiple quotes from different contractors can also help you compare prices and find the best deal.

Average Cost for Trenchless Pipe Repair

Trenchless pipe repair is a popular method used to fix damaged pipes without the need for extensive excavation. This process has become increasingly popular due to its cost-effectiveness and efficiency compared to traditional dig-and-replace methods. The average cost for trenchless pipe repair can vary depending on several factors, including the type of damage, location of the pipe, accessibility, length and diameter of the pipe, and the extent of damages.

The cost breakdown for each method can also vary significantly. For example, Cured-in-Place-Pipe (CIPP) is a common trenchless method that involves inserting a liner into the existing damaged pipe and curing it in place with heat or UV light. The average cost for CIPP ranges from $80to$250 per foot, depending on factors such as diameter and length of the pipe.

Pipe bursting is another trenchless method used to replace old or damaged pipes by breaking them apart and pulling a new one through. This method costs around $60to$200 per foot, depending on various factors such as soil conditions and access points.

Slip lining is another popular trenchless method that involves inserting a new pipe inside an existing one. This process costs around $50to$150 per foot, depending on various factors such as diameter and length of the pipe.

When comparing trenchless methods with traditional dig-and-replace methods, it’s important to note that trenchless options are generally more affordable. Traditional methods can cost anywhere from $50to$250 per foot or more depending on factors such as depth, soil conditions, and access points.

To find a reliable contractor for your trenchless pipe repair needs, it’s essential to conduct thorough research by checking online reviews and ratings from previous clients. It’s also advisable to get multiple quotes from different contractors before making any final decisions about which one to hire. Finally, verifying credentials such as licenses and insurance coverage can help ensure you’re working with a qualified professional who will get the job done right.

In conclusion, while there are many variables that affect the average cost for trenchless pipe repair, it remains an effective solution that offers significant savings over traditional dig-and-replace methods. By choosing reputable contractors who specialize in these methods and conducting thorough research beforehand, homeowners can save money while ensuring their pipes are repaired efficiently and effectively.

Cost Breakdown for Each Method

When it comes to trenchless pipe repair, there are several methods available, each with a different cost. Here is a breakdown of the cost for each method:

Cured-in-Place-Pipe (CIPP): This method involves inserting a flexible liner into the damaged pipe and curing it in place using hot water or steam. The cost of CIPP varies depending on the length and diameter of the pipe, as well as the extent of damage. On average, CIPP can cost anywhere from $80to$250 per foot.

Pipe Bursting: This method involves breaking apart the damaged pipe while simultaneously pulling a new pipe through its place. The cost of pipe bursting depends on factors such as the length and diameter of the pipe, as well as how difficult it is to access. On average, pipe bursting can cost anywhere from $60to$200 per foot.

Slip Lining: This method involves inserting a smaller diameter liner into the damaged pipe and sealing it in place. The cost of slip lining varies depending on factors such as the length and diameter of the pipe, as well as how difficult it is to access. On average, slip lining can cost anywhere from $60to$150 per foot.

It’s important to note that these costs are just estimates and can vary based on several factors such as location, contractor pricing, and materials used.

Compared to traditional dig-and-replace methods which involve excavation and replacement of entire sections of pipes, trenchless methods are generally less expensive due to reduced labor costs and less disruption to surrounding areas.

When looking for a trenchless pipe repair contractor, be sure to research local contractors thoroughly by checking their credentials and reviews. It’s also recommended to get multiple quotes from different contractors so you can compare prices and services offered.

In conclusion, trenchless pipe repair costs vary depending on the method used and several other factors. However, they generally tend to be less expensive than traditional dig-and-replace methods and can save time and resources in repairing damaged pipes.

Comparison with Traditional Dig-and-Replace Methods

When it comes to trenchless pipe repair, one of the most important factors to consider is the cost. While traditional dig-and-replace methods can be costly and time-consuming, trenchless methods offer a more efficient and cost-effective solution.

In terms of cost, trenchless pipe repair typically ranges from $60to$250 per foot, depending on the specific method used and the extent of damage to the pipe. However, this cost can vary significantly depending on a number of different factors.

One key factor that affects the cost of trenchless pipe repair is the type of damage to the pipe. For example, if there are only minor cracks or leaks in the pipe, repairs may be relatively simple and inexpensive. On the other hand, if there is significant structural damage or corrosion present, more extensive repairs may be required.

Another factor that can impact the cost of trenchless pipe repair is the accessibility of the pipes. If pipes are located in difficult-to-reach areas or require excavation to access, this can add additional costs to the overall repair process.

In addition to these factors, it’s also important to consider how trenchless methods compare with traditional dig-and-replace methods in terms of cost. While traditional methods may seem less expensive upfront, they often require significant excavation and labor costs that can quickly add up. In contrast, trenchless methods require minimal excavation and can often be completed much more quickly and efficiently.

Overall, while there are certainly costs associated with trenchless pipe repair, it’s important to consider both the short-term and long-term benefits when making a decision about which method to use. By weighing factors like type of damage, accessibility of pipes, and comparison with traditional methods, homeowners and business owners alike can make an informed decision about which approach will work best for their needs.

How to Find a Trenchless Pipe Repair Contractor

When it comes to finding a trenchless pipe repair contractor, there are a few key steps you can take to ensure that you’re getting the best possible service at a fair price.

First and foremost, it’s important to do your research. Look for local contractors who specialize in trenchless pipe repair and have a good reputation in your area. You can start by searching online or asking for recommendations from friends, family, or neighbors who have had similar work done.

Once you’ve identified a few potential contractors, be sure to get multiple quotes. This will give you an idea of what the average cost for trenchless pipe repair is in your area and help you identify any outliers. Keep in mind that the lowest quote isn’t always the best option; make sure you’re comparing apples to apples when it comes to services offered and materials used.

It’s also important to verify the credentials of any contractor you’re considering working with. Check their licensing and insurance information to make sure they’re qualified to perform the work you need done. You may also want to look for reviews or testimonials from past customers to get an idea of their level of expertise and customer service.

Overall, finding a reputable trenchless pipe repair contractor can take some time and effort, but it’s well worth it in terms of getting high-quality repairs at a fair price. By doing your due diligence upfront, you’ll be able to rest easy knowing that your pipes are in good hands.

Researching Local Contractors

When it comes to trenchless pipe repair, finding a reliable and experienced contractor is crucial. Researching local contractors can help you find the right one for your needs.

Start by asking for recommendations from friends, family, or neighbors who have had similar work done in the past. They may be able to provide valuable insights into their experiences with different contractors.

You can also do some online research to find local trenchless pipe repair contractors. Look for reviews and ratings on websites such as Yelp or Angie’s List to get an idea of their reputation and quality of work.

Once you have a list of potential contractors, contact them and ask for a quote. Be sure to provide detailed information about your specific situation so they can give you an accurate estimate.

When comparing quotes, don’t just look at the price. Consider factors such as the contractor’s experience, reputation, and the materials they will use for the job.

It’s also important to verify the credentials of any contractor you are considering hiring. Check if they are licensed and insured, and ask for references from previous clients.

By taking the time to research local contractors and getting multiple quotes, you can ensure that you find a reliable and qualified professional who can handle your trenchless pipe repair needs at a fair cost.

Getting Multiple Quotes

When it comes to trenchless pipe repair, the cost can vary depending on several factors. One way to ensure that you are getting a fair price is by getting multiple quotes from different contractors. This allows you to compare prices and services offered by each company.

To get multiple quotes, start by researching local contractors who specialize in trenchless pipe repair. You can do this by searching online or asking for recommendations from friends and family members who have had similar work done.

Once you have a list of potential contractors, reach out to each one and request a quote for your specific project. Be sure to provide as much detail as possible about the location of the pipe, the type and extent of damage, and any other relevant information.

When reviewing the quotes, pay attention not only to the total cost but also to what services are included in that cost. Some contractors may offer additional services such as video inspections or warranties that could make their quote more appealing.

It’s important to verify credentials before making a final decision on which contractor to hire. Check if they are licensed and insured, and ask for references from past clients.

By taking the time to get multiple quotes and comparing services offered by different contractors, you can ensure that you are getting the best value for your money when it comes to trenchless pipe repair.

Verifying Credentials

When looking for a trenchless pipe repair contractor, it is crucial to verify their credentials before hiring them. This will ensure that you are working with a qualified and experienced professional who can provide high-quality work.

One of the first things you should check is if the contractor has a valid license to operate in your area. You can usually find this information on their website or by contacting your local licensing board. A license ensures that the contractor has met certain requirements and standards set by the state or municipality.

You should also ask for proof of insurance, specifically liability insurance and workers’ compensation insurance. Liability insurance protects you from any damages that may occur during the repair process, while workers’ compensation insurance covers any injuries sustained by the workers on your property. Without these insurances, you could be held liable for any accidents or damages that occur.

It is also important to check if the contractor has any certifications or memberships in industry associations such as the National Association of Sewer Service Companies (NASSCO) or the Pipe Lining and Coating Certification Program (PLC). These organizations ensure that their members adhere to strict standards and guidelines for trenchless pipe repair.

Finally, you can also check online reviews and ratings from previous clients to get an idea of their experience working with the contractor. This will give you an idea of their professionalism, quality of work, and customer service.

In summary, verifying a trenchless pipe repair contractor’s credentials involves checking for a valid license, proof of insurance, certifications or memberships in industry associations, and online reviews from previous clients. By doing so, you can ensure that you are working with a qualified professional who can provide reliable and high-quality services.

Note: This outline contains five main subheadings, each with additional subheadings nested beneath them.

When it comes to trenchless pipe repair, one of the most important things to consider is the cost. The cost of trenchless pipe repair can vary depending on several factors, including the location of the pipe, length and diameter of the pipe, type and extent of damage to the pipe, accessibility of the pipes, and the method used for repair.

The location of the pipe is an important factor that affects trenchless pipe repair costs. Pipes that are located in hard-to-reach areas or require specialized equipment for access may be more expensive to repair than those that are easily accessible.

The length and diameter of the pipe also play a role in determining the cost of trenchless pipe repair. Longer and wider pipes may require more materials and labor, which can increase overall costs.

Another factor that affects trenchless pipe repair costs is the type and extent of damage to the pipe. Different types of damages such as cracks, corrosion or blockages will require different methods for repairs which can significantly affect costs.

Accessibility is another key factor affecting trenchless pipe repair costs. If a damaged section of piping is difficult to reach or requires excavation work before repairs can begin, this will add significant additional costs to any project.

There are three main types of trenchless pipe repair methods: Cured-in-Place-Pipe (CIPP), Pipe Bursting, and Slip Lining. Each method has its own unique advantages and disadvantages which will impact their respective costs.

The average cost for trenchless pipe repair varies depending on several factors such as location, length/diameter, type/extent of damage, accessibility etc. However, it’s generally more affordable than traditional dig-and-replace methods due to reduced labor time and materials required.

To find a reliable contractor for your trenchless piping needs research local contractors online or through referrals from friends/family members who have had similar work done before. Once you have found potential contractors get multiple quotes from them before making a final decision while verifying credentials such as licenses and insurance coverage.

In summary, understanding all these factors is crucial when estimating how much it would cost to carry out a trenchless pipeline project successfully.

Conclusion

In conclusion, the cost of trenchless pipe repair can vary depending on several factors such as the location, length, diameter, type and extent of damages, as well as accessibility of the pipes. There are three main types of trenchless pipe repair methods: Cured-in-Place-Pipe (CIPP), Pipe Bursting, and Slip Lining. Each method has its own cost breakdown and varies in comparison to traditional dig-and-replace methods. When looking for a trenchless pipe repair contractor it is important to do your research by finding local contractors, getting multiple quotes and verifying credentials. While the cost may seem higher initially for trenchless pipe repair methods, they can ultimately save you money in the long run by avoiding more extensive damage and disruption caused by traditional methods.